Do you want to know how to keep your Wagner Control Pro 130 in good shape and clean it? You’re in the right spot. Cleaning and maintaining your machine is vital if you want it to last longer without affecting how well it works. This blog post will tell you how to take care of your Wagner Control Pro 130 using materials that are easy to find and don’t cost much. You can learn everything you need here, from how to take apart the sprayer’s parts to the best cleaning solutions, step-by-step operation checklists, and tips and tricks. These steps make your equipment last longer and work better, so you always get better results. So let’s get started!


Tools Required:

  • Soft cloth
  • Dry cleaning solvent
  • Plastic putty knife
  • Brush with soft bristles
  • A vacuum cleaner with a crevice tool attachment
  • Compressed air duster
  • Isopropyl alcohol (IPA) for the inlet valve and pick-up tube area.

Using the right tools when cleaning your Wagner Control Pro 130 sprayer is essential. A soft cloth is necessary to gently clean the surface and remove any residue. Dry cleaning solvent can be used for removing stubborn stains. Use a plastic putty knife with caution on the surfaces as it could scratch them. A brush with soft bristles should also be used to reach crevices that may not be accessible with other tools.

How To Clean Wagner Control Pro 130?

It is vital to keep your Wagner Control Pro 130 sprayer running smoothly. Cleaning the sprayer regularly can help prevent the buildup of dirt, paint, or other grime from blocking the nozzle or clogging up the system. It is also vital to ensure that all parts are correctly lubricated and taken care of to avoid any issues down the line.

The main parts you will want to clean regularly include the filter, gun body, hose, and tips.

Here’s how to go about it:

Step-by-step process To Clean Wagner Control Pro 130 with Headings:

Cleaning the Filter:

The filter should be cleaned weekly. Use a soft cloth and dry cleaning solvent to clean the filter, then rinse with water.

Cleaning The Gun Body:

To ensure the gun body is free of dirt or paint residue, use a plastic putty knife to remove any caked-on material, followed by a brush with soft bristles for more stubborn stains. Then, use a vacuum cleaner with a crevice tool attachment to suck up any remaining dirt inside the gun body. Finally, spray a compressed air duster into difficult-to-reach areas to help clear away any leftover debris.

Cleaning The Hose:

Start by running a cloth saturated in warm, soapy water along the length of the hose. Then, open both ends of the hose and use a vacuum cleaner to suck up any remaining dirt or debris. Finally, use Isopropyl alcohol (IPA) for the inlet valve and pick-up tube area to remove any residue from previous jobs.

Cleaning The Tips:

To clean the tips, you will want to start by soaking them in a mixture of white spirits and detergent for around 5 minutes. Next, brush away any stubborn grime with a soft, bristled brush. Finally, rinse off with water to remove all surface dirt from each tip.

Following these steps, your Wagner Control Pro 130 should be kept clean and running optimally. Regular maintenance will help ensure that your sprayer continues to perform at its best and prevent any long-term problems or damage to the unit.

Can I clean my Wagner paint sprayer with paint thinner?

You can clean your Wagner paint sprayer with paint thinner or mineral spirits. However, it is essential to note that a cleaning solution specifically designed with a Wagner paint sprayer is recommended. This will help ensure that the parts of the unit remain in good working condition and minimize any damage caused by exposure to harsh chemicals. When using a cleaning solution designed with a Wagner paint sprayer, follow all instructions carefully and take all necessary precautions.

Additionally, it is vital to ensure the sprayer has been completely drained before storing it. For best results, thoroughly rinse out the interior of the unit with warm water after every use and allow it to dry completely before storing. These steps will ensure that your Wagner paint sprayer is in good condition and will last for years.

Contact the manufacturer for instructions if you need help cleaning or maintaining your Wagner paint sprayer. Also, remember that using any kind of thinner can affect the finish of your work and could even potentially damage some materials. It should only be used when necessary. Additionally, make sure to read all safety warnings associated with the use of thinners before beginning your project.

Following these simple steps, you can maintain your Wagner paint sprayer and ensure it has been in good working order for many years. Taking proper care of your equipment is vital to achieving professional-quality results with every painting project!

Frequently Asked Questions:

How do I clean the filter?

The filter can be cleaned with a soft cloth, a dry cleaning solvent, and a plastic putty knife. Be careful not to damage the filter, as it is an essential component of paint spray guns.

How do I clean the gun body?

Start by removing any dirt or debris from the outside of the gun body using a brush with soft bristles. Next, apply a few drops of water or lubricant between the trigger and handle to help loosen any dirt buildup. Finally, use a compressed air duster to remove all debris inside the gun body.

How do I clean the hose?

Remove large dirt or dust particles from the hose using a vacuum cleaner with a crevice tool attachment. Then, clean the inside of the hose with Isopropyl alcohol (IPA) for any remaining residue.

How do I clean the tips?

Start by removing any loose paint or debris that may have built up on the tip. Next, brush with soft bristles and water to remove any dirt buildup. Finally, use an air compressor to blow out all remaining particles before you store your tips away.


Finally, cleaning the Wagner Control Pro 130 is simple but necessary. Clean it after each use to ensure optimal performance and extend its life. For the best results, follow these steps: Unplug the sprayer from the power source, disassemble all parts, rinse with water, scrub off debris or caked-on paint with a brush or cloth, and completely dry all parts before reassembling and plugging in. With proper maintenance, your Wagner Control Pro 130 will last for years!

Read More:

Similar Posts